|
150cc GY6 Engine
Below are several of the engine modifications I have done to the Twister Hammerhead Junior.
|
|
|
9 Gram Rollers
CVT roller weights Purchased from www.bladeatv.com Price: $11.48 |
1500 RPM Power Spring
"Raises your rpms throughout your cvt ratio and increasing your backshift for coming out of corners accelerating.Also increases belt tension for less chance of slippage which I feel keeps the belt cooler.Keeps you engine at higher rpms for hill climbing." - kamark from WWW.BUGGYNEWS.COM Purchased from www.bladeatv.com Price: $20.96
|
|
|
|
Koso High Performance Variator
A high performance variator by KOSO that has Dyno specs showing it to increase from the point of accelaration straight to the top end... they tested it on a Dynojets model 200 Dynometer and show an increase over the entire accelaration curve from the standar. It comes stock with 9 gram rollers, it is slightly larger then the standard Variator(cvt) and it is coated with high temp non-stick tephlon sort of like cook ware.... the roller ramps are taller and a steeper angle (BladeAtv) Purchased from nam6869usmc on www.buggynews.com Price: $50.00 |
Blister's Reverse Bracket
Half the weight and 10x stronger than the stock reverse bracket Purchased from John(Blister) on www.buggynews.com Price: $20.00
|
|
|
|
Twister Aluminum Performance Exhuast
Upgrading your stock exhuast to a performance one helps you gain more power and speed in your engine Purchased from www.gopowersports.com Price: $99.00 |
Uni Filter and Redneck Intake
Increases your airflow to your engine. Used a simple Uni air filter and some shower drain tubing. Purchased Uni Filter from Ryan (Offroadkarter www.buggynews.com) Purchased Drain Tubing from Home Depot Price: Uni- $16.95 Price: Drain Tube- $6.99
|
|
|
|
Racing CDI Ignition
Purchased from www.Bladeatv.com Price: $55.96 |
CVT Filter
Upgraded the stock CVT filter with a Chrome Top Uni Filter to allow more air into the Transmission Purchased from www.bladeatv.com Price: $15.95
|
|
|
|
|
|
|
|
